Placement thread makes the job easier and saves material because it cuts the end of the row will be used for another layer.
Majolica is trickier to place larger than the flows and highlighting the shortcomings of more aplomb.
To cut the majolica us to a rule making a scratch with the tool steel hard on the face of the glazed majolica.
To split the majolica, in supporting this cutting line on a steel rod and push hard on both sides of the court.
Perforations are marked with pencil and drill on a firm but soft, with a bit of pure steel.
Booting the excess material into small pieces with pliers because it runs the risk of breaking the despostillarlo or majolica.
The joints are filled with a forge with a pump or spatula, then 10 or 20 minutes wash with damp sponge. Continue ............
Entradas
